A Block Party and Bluebell Woods
Charity Quilt Blog Hop

Fussy Cutting Hexagons with 2 cuts!

This week I have been fussy cutting hexagons for the new triangle blocks I designed. I wanted to share with you the really easy technique I came up with. I'm sure this must have been done before but I haven't seen it around.

For the new blocks I released last week I have decided to use Tula Pink fabrics. There are so many wonderful motifs just perfect for fussy cutting and I wanted to explore this for the triangle based pieces in my quilt.

Here's the hexagon I cut out with just two cuts:

Hexagon

Isn't it cute?

So here is how I did it:

Step 1:

My hexagon needs to have a finished height in the quilt of 4". I cut a 4 1/2" strip, fitting in the pattern I wanted:

Cut strip

Step 2:

Fold the strip of fabric in half - note, the fold is at the bottom of the photo.

Fold in half

Step 3:

Place your 60 degree ruler on top of the strip. Line up the centre line of the ruler with the centre of the pattern you want to fussy cut.

If you have a ruler with a tip like the C&T ruler here, put the 4 1/2" line on the fold.

Put on ct ruler

If you are using a Creative Grids ruler which has a cut-off tip, place the 4 1/4" line on the fold:

Put on cg ruler

Step 4:

Cut on both sides

Cut both sides

Open out, and voila!

I measure my hexagons from flat edge to flat edge, so this one is 4 1/2" from top to bottom.

Done

 

I used my hexagons in this block I called 'Balance'. Its one of the new add-on blocks available for my Modern Triangle Sampler pattern.

Balance block

You can get the pattern for this and all the other blocks in the Modern Triangle Sampler in my Craftsy store. All the blocks are cut with a triangle ruler and the piecing is easy by machine (no y-seams!)

Sheila

 

Comments